top of page
Ebb/flowsystems

Ebb/flow systems are the most frequent used cultivation system for plant production in a modern greenhouse. For ornamental plants and vegetable young plants raising too.

 

An ebb/flow system is a closed irrigation system. The fertilized irrigation water is pumped out on the trays, by which the cultivation starts soaking up the water and the added fertilizer. After a certain time the trays are emptied again and the remaining water runs back into a central collection tank.

 

It can then as needed be filtered, treated and added more clean water and fertilizer till the mixture again has the desired composition before the next watering is done.

Ebb/flow systems holds a number of advantages, i.e.:

  • Equal division of watering the plants, which gives a very uniform plant.

  • No water or fertilizer is wasted.

  • Automatic dosing the fertilizer in the water.

  • Very precise management of irrigation.

  • Disinfection of the return water.

From left to right Jacob Sørensen, Xander van der Zande, Bo Jørgensen.

Title of the image

Ebb / flowsystems
Ebb/flowsystems

Ebb/flow systems are the most frequently used cultivation systems for plant production in a modern greenhouse. For ornamental plants and vegetable young plants raising too.

 

An ebb/flow system is a closed irrigation system. The fertilized irrigation water is pumped out on the trays, by which the cultivation starts soaking up the water and the added fertilizer. After a certain time the trays are emptied again and the remaining water runs back into a central collection tank.

 

Before re-use the water can be filtered and treated. After treatment by filtering or UV disinfection, the water can be re-used again by adding the required amount of fertilizers.

Ebb/flow systems hold a number of advantages, i.e.:

  • Equal division of watering the plants, which gives a very uniform plant.

  • No water or fertilizer is wasted.

  • Automatic dosing the fertilizer in the water.

  • Very precise management of irrigation.

  • UV disinfection of the return water.

We offer 4-sided bench trays in customer requested measurements.

 

The trays in one piece are of cause produced in a 100 % original material of highest quality. The modern production methods and tools ensure a so far unknown quality and precision of ebb/flow bench trays. These conditions hands the end user a quality product that ensures a problem free, long lifespan of more than 20 years.

Example of advantages the customer gets:

  • No joints

  • No glue jobs

  • No leaks

  • Smooth surfaces and smooth channels

  • Easy and quick installment

  • Produced in requested measurement

If you have any questions on this product feel free to contact DanDutcH

Four sided 'one piece' trays
Rolling bench trays

We produce a large amount of various ebb/flow trays for rolling benches.

The rolling bench trays are delivered in a great variety of different widths. The tray length is normally not recommended to exceed 20 meters. If longer benches are the case, it is recommended to split up the ebb/flow trays in to 2 or more pieces, so the length on one single together-glued unit does not exceed 20 meter.

Contact about Ebbflowsystem
Contact

Xander van der Zande​

Mobile: +31 650277510

 

Adresse

Industrivej 19

DK-5750 Ringe

Denmark

  • LinkedIn - Black Circle
  • Black Twitter Icon

Name

Email *

Phone

Company

Message *

Bedankt! Bericht verzonden.

bottom of page